SLURRY PUMPS / GRAVEL PUMPS

PUMPS & SYSTEMS 

DOVE Slurry Pumps / Gravel Pumps are designed to deliver the highest value in terms of Quality & Efficiency , as well as lowest Total Ownership Cost to our clients. DOVE Slurry Pumps/ Gravel Pumps are produced in two configurations of In-Line (Horizontal) Slurry Pumps / Gravel Pumps and Submersible (Vertical) Slurry Pumps/ Gravel Pumps.

DOVE gravel pump, slurry pump

SUBMERSIBLE (VERTICAL) SLURRY PUMPS – GRAVEL PUMPS

Economics of Slurry Pumps / Gravel Pumps

Most often, these types of slurry pumps are the most appropriate for all types of hydraulic sluicing mining operations. The intended purpose of using Slurry Pump/ Gravel Pump is to eliminate the necessity of trucking ore to the treatment plant.

By applying Slurry Pumps / Gravel pumps in the mining operation instead of trucks, overall ore transportation costs are reduced by a considerable amount. Rates of production throughout the operation are increased by a continuous flow of ore to the treatment plant at all times. No downtime loss due to trucks breaking down or sufficient trucks being unable to keep up with the mining ore removal.

 

Five models to choose, from 90 m3 /hour to 554 m3 /hour. Configured as a highly efficient, shaft driven, direct drive Vertical (Submersible) Slurry Pump / Gravel Pump, which can be used as a semi-submersible pump to a depth of 1.2 – 1.6 meters (depending on the model). Primarily used in hydraulic sluicing, as the most efficient means of slurry ore transport from the hydraulic sluicing mining area to the wash plant site, away to the wash plant site. Used whenever trucking the ore is unapplicable or not feasible. The other usage is for removing and transporting slurry ore from a temporary tailings dam at the treatment plant site, away to a permanent disposal dam site.

The other usage is for removing and transporting slurried ore from a temporary tailings dam at the treatment plant site, away to a permanent disposal dam site.

Highly efficient tool for breaking and disintegration of heavy clay, configured either after Trommel or Grizzly Separator and prior to the concentration of minerals contain in heavy & sticky clay ore. These models are mounted on robust enclosed skid frames for protection and foot suspending below a tri-frame if required. The pump can then be suspended above the pump medium i.e waste treated ore, for convenient positioning.

IN-LINE (HORIZONTAL) SLURRY PUMPS – GRAVEL PUMPS

DOVE Gravel pump, slurry pump

A robust design, highly efficient, all purpose slurry transport pumps, used for transportation of all types of ore & slurry, where wheeled transport is not feasible or inapplicable. Nine models to choose, with processing capacity range of 36-720 m3 / hour.

Pump can also be used in the wash plant cycle for many other applications such as:

  • Pumping under sized ore, Example: Trommel into the Jigs, if the plant set-up does not allow gravity flow arrangement.
  • From Primary Jigs to Secondary Jigs that is stacked on a tier basis.
  • Pumping treated , waste slurry ore from a temporary retention dam at the treatment plant to the permanent retention / trailings dam. Particularly useful if space and especially height is a limiting factor at the plant site.

The In-line (Horizontal) Slurry Pumps / Gravel Pumps are mounted on a robust enclosed skid frame, as well as pump canopy, for protection of the pump components. An optional 4-wheels trailer, or wheel base and stand support; is available for all models.

CONTACT US  for more information about DOVE Slurry Pumps.

SUBMERSIBLE (VERTICAL) SLURRY PUMPS – SPECIFICATIONS

CATEGORY UNIT GPV-4510 GPV-4512 GPV-5615 GPV-5618 GPV-8822 GPV-8824 GPV-81022 GPV-81024
Capacity (Delivery Volume) M3/hr. 90 100 173 218 500 540 550 554
USGPM 396 440 760 950 2,200 2,376 2,420 2,430
Liter/Sec. 23 28 48 60 138 150 153 154
Pump Size Inch 4 X 5 4 X 5 5 X 6 5 X 6 8 X 8 8 X 8 8 X 10 8 X 10
Power – Diesel Engine Hp. 85 100 165 190 220 265 265 300
Power – Electric Motor Hp 35 40 80 90 120 160 160 180
Speed Rpm 1,450 1,450 1,450 1,450 1,450 1,450 1,450 1,450
Impeller Inch 10 12 15 18 22 24 22 24
Impeller Shaft Depth M3/Hr 1 1 1 1 2 2 2 2
Rock Size Intake (Max) Inch 2 2 3 3 4 4 4 4
Pumping Head Meters 46 46 46 46 50 45 40 40
Head/Ft. 151 151 151 151 164 148 132 132
Weight with Engine Kg. 1,115 1,270 1,750 1,800 2,760 2,785 2,840 2,880

IN-LINE (HORIZONTAL) SLURRY PUMPS – SPECIFICATIONS

CATEGORY UNIT GSP-6415 GSP-10821 GSP-10828 GSP-121026 GSP-121037 GSP-141234 GSP-141240 GSP-161450 GSP-161442
Capacity m./hr. 36 – 250 216 – 936 180 – 1440 360 – 1440 288 – 2808 576 – 3024 720 – 3600 324 – 3600 720 – 4320
Pump Size Iinch 6 X 4 10 X 8 10 X 8 12 X 10 12 X 10 14 X 12 14 X 12 16 X 14 16 X 14
Power Hp. 80.4 750.4 750.4 804 1608 1608 804 1608 1608
Kw. 60 560 560 600 1200 1200 600 1200 1200
Speed Rpm. 600-1400 500-1000 500-950 400-850 350-700 300-700 300-500 300-500 250-500
Impeller Diameter inch 15 21 28 26 37 34 40 50 42
mm 378 533 711 667 950 864 1016 1270 1067
Solid Particle Handling mm. 82 178 180 220 220 241 241 230 230
inch 3.2 7.0 7.1 8.7 8.7 9.5 9.5 9.1 9.1
Head m. 5-52 8-52 24-80 10-60 16-80 8-70 18-44 26-70 12-48
Ft. 16-171 26-171 79-262 33-197 53-262 26-230 59-144 85-230 39-157

* The solid volume through put and head may fluctuate, based on the type of the ore, ratio of the fluid / solids mixture, average rock size, the speed and the method of feeding. 

* The overall weight & dimension could fluctuate, based on the type of engine or motor and other accessories.

* All DOVE equipment carry a 2 years (24 months) standard Manufacturer Warranty, which can be extended to 5 years, in addition to lifetime spare parts supply service.

* DOVE reserves the right to modify the specifications at anytime, without prior notice.

 

 

CONTACT NOW FOR BROCHURE & QUOTATION