Positive Displacement Pumps | PD Pumps

Positive displacement pumps, or PD pumps, are a form of vacuum pump that creates a consistent flow of fluids that moves liquids at a steady speed through the system. PD pumps are capable of moving a variety of fluids like slurry and sludge, muds, oils, chemicals, pulps, pastes, wastes, foods, and other liquids. The positive displacement pump uses a mechanism or mechanisms to create a suction or vacuum that draws in and captures the fluid in its chamber before passing it through. A positive displacement pump is ideal for higher viscosity liquids that are transported at a lower flow rate but a higher pressure. PD pumps fit into two main classifications, rotary and reciprocating pumps. Each includes multiple variations of pumps that are identified by the mechanism they use for moving the fluids.

Rotary pumps use a rotating mechanism to create suction, while the mechanisms on reciprocating pumps move in a back-and-forth action. The rotary pump types use gears, lobes, vanes, and screws for moving fluids. Reciprocating positive displacement pumps use diaphragms, pistons, and plungers. The different types of PD pumps all have applications that they work best in, and they also provide excellent pumping in a variety of other cross applications.

DAE Pumps manufactures a variety of different types of top-rated positive displacement pumps. Our large selection of affordable heavy-duty PD pumps last, giving you the complete peace-of-mind. The expert team at DAE Pumps is available to help you select the right type and size pump that works for your project. Contact us today!

Reciprocating Pumps

DAE Pumps offers a variety of reciprocating positive displacement pumps for a variety of purposes. Choose from our piston or plunger pumps for high-pressure needs or our diaphragm pumps for use with hazardous or corrosive materials. We have the reciprocating pump available for you.

Rotary Pumps

Rotary pumps by DAE Pumps provide consistent movement of sludge, slurry, thick mud, chemical, solids, and a variety of mixed fluids and solids. Let us help you select the gear, lobe, vane, screw, or twin-screw pump that is right for your application need.

Reciprocating Positive Displacement Pumps

Reciprocating positive displacement pumps repeat a back-and-forth movement that draws the into a chamber then pushes them out the other end. The high viscosity fluids are suctioned in then rapidly pushed out. The repeated action can cause strong vibrations in the pump during operation, but DAE Pump heavy-duty pump minimizes the vibrations for smooth operations. Once the material is suctioned into the chamber, the valve closes and doesn’t allow the fluid back out. When the pump pushes the liquids out, the valve around the outlet opens for the fluids to flow out the discharge or outlet end. We provide piston and diaphragm pumps for large scale industrial operations. 

Diaphragm Pumps: 

Diaphragm pumps use a flexible membrane that expands the volume of the pumping chamber bringing in the fluid by opening the inlet valve, then compresses to push out the materials through the outlet valve. DAE Pumps diaphragm pumps are hermetically sealed, making them safe for pumping hazardous and corrosive liquids. They also work well in water treatment, paints, oils, metering, dispensing. Diaphragm pumps are self-priming and are excellent for working with low flow applications that need high-pressure output.

Piston Pumps: 

The piston pump uses a piston to draw in liquids and solids by creating a vacuum in the chamber to suction in the materials, then pushing them out the other end. The piston repeatedly moves up and down inside the pump chamber to pump the material. The DAE Pumps piston pumps use high-quality O-rings to ensure reliable performance. These pumps can be uses for high-pressure washing, oil production, paint spraying, and other low viscosity liquids.

Rotary Positive Displacement Pumps

The rotary displacement pumps use cogs and gears to force liquids and solids through the pump. The rotating gears or cogs create a seal with the pump casing causing suction. The material is drawn into the pump and enclosed between the teeth of the rotation gears/cogs then transferred to the outlet. DAE Pumps provides multiple types of rotary pumps like gear pumps, lobe pumps, vane pumps, screw pumps, and twin-screw pumps.

Gear Pumps: 

Gear pumps are one of the most common types of positive displacement pumps. They provide a constant volume of fluid that passes between the teeth of two meshing gears and the casing. The rotating gears and separation of teeth create a suction that pulls fluid in through the inlet. The gears then trap the liquid and move it around the casing to the discharge or outlet. Each revolution creates consistency in the flow of fluid.

There are two main types of rotary gear pumps, internal and external. Both types use similar principles for pumping fluids. Two gears are inside a casing in a way that the teeth lock together. As a motor turns one of the gears the locking teeth turn the other. The difference in the two designs is that an external gear pump uses side-by-side gears (typically the same size), so when the motor turns one gear, the other rotates in the opposite direction. The internal gear pump design uses two different size gears. A motor turns the small gear, which is inside the larger gear, rotating it in the same direction.

DAE Pumps offers economical rotary gear pumps of both types in a variety of sizes. No other gear pumps can match the performance and durability of our pumps. Because of the close tolerance between the gears and casing, most gear pumps are highly susceptible to wear, but DAE Pumps gear pumps outperform all others. Our pumps process a wide range of viscosities and are ideal for handling fluids at high pressures and low flow rates. DAE Pumps rotary gear pumps are widely used in chemical installations to pump high viscosity fluids. They are one of the most common types of pumps for moving corrosive liquids and hydraulic fluid power applications.

DAE pumps gear pumps provide consistency in moving a variety of slurry materials and are suitable for several industries like paints, food processing, chemicals, oil & gas, and others. Our rotary gear pumps are available in duplex steel, cast steel, and cast iron, among other materials. Contact DAE Pumps to customize a pump to your specific needs.

 

Internal Gear Pump

External Gear Pump

Lobe Pumps: 

 

Lobe pumps are like gear pumps in that fluid flows around the interior of the casing, but they use lobes instead of the gears with teeth. The lobes do not touch each other, thus reducing wear, and they are driven by external timing gear which can allow the lobe pump to operate in either direction.

Rotary lobe pumps are capable of handling thick fluids that are laden with solids. Their gentle handling of solids works well mixed with low viscosity substances making them a preferred pump of food and wine producers and manufacturers. The DAE Pumps positive displacement lobe pumps for these industries offer quick-release fasteners for easy access to the inlets, outlets, fitting, and lobes for cleaning and sanitizing.

In addition to the food and beverage industries, DAE Pumps lobe pumps applications include pulp and paper, oil, gas, chemical, pharmaceutical, wastewater, biotech other industries. These rotary lobe pump types are lined with an elastomer to protect the internal spacing, Also, multi-lobe pumps can significantly reduce vibration.

Vane Pumps: 

Vane pumps use blades, know as vanes, that slide in and out of rotor slots to move fluids. The action creates a suction that pumps fluids. The vane pumps use multiple sets of vanes that mount on an off-center rotor that sits close to the cam wall. This creates a crescent-shaped cavity on the other side. The blades, which are always in contact with the cam wall, turn with the rotor. As the rotor spins, the vanes slide out when they reach the cavity, trapping fluid. As the vanes reach the end of the open space, they slide back in, and the trapped fluid then to the outlet or discharge valve. The DAE Pumps vane pumps are used in automotive, fuel loading and transmission, drink dispensing, and other industries.

Screw Pumps: 

Screw pumps and twin-screw pumps use rotating screws to move liquids and solids from one end of the pump to the other. The turning action creates a spinning motion that pumps material. The twin-screw pumps are identical to the screw pump, but with a dual screw for more power. Screw pumps are capable of high flow rates with very little to no vibration. They provide excellent usage in irrigation, oil production, fuel injection, and fuel transfer applications.

The DAE Pumps Advantage

With over 30 years of experience in pump designing and engineering, DAE Pumps keeps your pumping needs in mind. We provide a variety of affordable heavy-duty pumps that are used in various industries and for a wide array of applications. Not all applications are the same, so not all pumps should be the same. Our experienced team can help you select the right pump per your requirement. We also offer custom pump designs.

DAE Pumps provides cost-efficient durable pumps that last. Our pumps undergo extensive testing and quality control to ensure you get a reliable, worry-free pump that does the job you need. Rely on DAE Pumps for in-stock pumps, dredging equipment, and other product that are ready-to-ship.

You can trust DAE Pumps! 

  

PD Pump Advantages

Depending on the use and application, positive displacement pumps can hold a distinct advantage over centrifugal pumps. The mechanical movement of fluid by displacement does have certain benefits over the centrifugal action:

  • PD Pumps handle viscous fluids with ease
  • Much more controllable consistent flow of fluids. Double the output by doubling the size and speed
  • Pump speeds can be low, making them controllable, smooth, and less disruptive
  • The action makes positive displacement pumps self-priming
  • The discharge pressure can be very high, subject to the motor power, casing strength, shaft sealing, and volumetric efficiency
  • The net positive suction head required (NPSHR) is low, making them very useful where there is little net positive suction head available (NPSHA)
  • PD Pumps are bidirectional, meaning they can pump in both directions, forward and backward.

Accessories

DAE Pumps offers a variety of accessories for all your project needs. We stock multiple sizes of slurry hoses, ultrasonic flow meters for ensuring optimal pumping performance, or hydraulic power units for powering up your operations. All our parts are always in stock and available for immediate shipping to anywhere in the US and the world. Contact a DAE Pumps representative today!

Custom Pump Curve

A pump curve is a graphical representation of a pump’s flowrate against a certain level of the head. Using a pump curve that is specific for your application will greatly help in selecting the pump best for you, ultimately saving you time and money.

Pump curves data gathered during testing of the pump’s performance at the manufacturer’s facility and provide the end-user with a graph of how the pump will operate over a set range. To build the pump curve, our engineers compile several variables, including the type of material, fluid viscosity, distance to pump, target GPM, and job-specific factors. This ensures the most efficient pump is recommended for your project.

Get your custom pump curve today!

Get in Touch