Omega®
Main applications
- Building services
- Chemical industry
- Cooling water and condensate
- Desalination
- District heating
- Drainage pump stations
- Energy
- Fire fighting and sprinkler systems
- Flood / stormwater holding tanks
- Heat transfer, Cooling circuits
- Industry engineering
- Irrigation
- Lake, Damwater extraction
- Mining
- Municipal waste water
- Oil /Gas
- Petrochemical Industry
- Power Stations < 100 MW
- Power Stations > 100 MW
- Pressure Drainage
- Pressure boosting
- Pressure boosting, fire fighting systems
- Process
- Pumps used as Turbines
- Rawwater transport
- Special processes
- Steel
- Systems
- Waste water
- Waste water transport
- Water
- Water Extraction
- Water supply
- Water transport
- Water works
- Watertransport
- Watertreatment
Technical data
Q max
2,880.0 m³/h
H max
210.0 m
Design
Single-stage axially split volute casing pump for horizontal or vertical installation, with double-entry radial impeller, mating flanges to DIN, EN or ASME.
Application
Pumping water with a low solids content, e.g. in waterworks, irrigation and drainage pumping stations, extraction duties in desalination systems, power stations, fire-fighting systems, shipbuilding, district heating or cooling.
Further technical information about Omega®
Overview of technical data
| Q (50Hz) | 50.0 – 2,880.0 (m³/h) |
| H (50Hz) | 7.0 – 210.0 (m) |
| Type of bearing | Rolling element and plain bearings |
| Casing partition | Axially split |
| Drive frequency | 50 Hz /60 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage, high voltage |
| No. of impeller entries | Double entry |
| Impeller material (EN standard) | BRONZE, CHROMSTAHL, DUPLEXSTAHLGUSS, SUPER DUPLEX |
| Type of installation | Long-coupled |
| Type of coupling | Direct, Gear |
| Type of lubrication | Grease / Product lubrication |
| Max. permissible fluid temperature | 80.0 (°C) |
| Nozzle position | In-line |
| Maximum operating pressure | PN 10, PN 16, PN 25 |
| Pump set location | Dry installed |
| Shaft material (EN standard) | 13 % CHROMSTAHL, DUPLEXSTAHL |
| Suction characteristics | Non-priming |
| Suitable for drinking water | Yes |
| Type of casing | Volute casing |
| Type of impeller | Closed, Radial |
| Type of connection | Flange |
| Casing material (EN standard) | GRAUGUSS |
| eClass assignment | 36410103, 36410100, 36410101, 36410000 |
| Installation position | Horizontal or vertical |
| Shaft seal type | Gland packing, Mechanical seal |
| Main applications | Industry and process engineering, Water, Energy, Building services, Mining / Dredges |
| Casing material | Cast iron, Duplex steel, Cast duplex steel, Nodular cast iron |
| Maximum discharge-side pressure | 25.0 (bar) |
| Maximum drive rating | 1500.0 (kW) |
| Type of installation | 00 |
| Maximum speed of rotation | 3500.0 (1/min) |