Search thousands of topics on CostHelper

BROWSE ALL TOPICS >> babies & children  cars  consumer electronics health & personal care home & garden personal finance  pets  schools small business sports weddings
CostHelper > Home and Garden  > Driveways, Pools & Outdoor Living > Well Pump

Well Pump Cost


How Much Does a Well Pump Cost?

 
Shallow Well Jet Pump: $100-$500+ Deep Well Jet Pump: $175-$800+ Submersible Residential Well Pump: $200-$1,200+

There are two main types of pumps used to bring water up from residential water wells: submersible and jet. With submersible pumps the electric motor and the pump are installed inside the well as a single cylindrical unit, so the pump actually pushes the water up. In contrast, jet pumps act like a long straw, using high pressure to create a vacuum suction that draws water to the surface. Shallow jet pumps (up to 25' deep) have the equipment mounted at the surface, while a deep well jet pump has an ejector installed inside the well.

Typical costs:
  • Shallow well jet pumps typically cost $100-$500 or more, depending on materials (cast iron, stainless steel, thermoplastic, carbon-ceramic), capacity (gallons per minute), motor (from 1/3 horsepower to 1.5 HP) and options like a self-priming feature or pre-wired pressure switch. For example, the Dayton 4HEY4 1/2HP Shallow Well jet Pump[1] in thermoplastic costs $269 and the cast iron Dayton 1D872 1HP Shallow Well Jet Pump[2] costs $484.
  • Expect to pay $175-$800 or more for a deep well jet pump, depending on materials, capacity, motor (1/2HP to 2HP) and features such as multiple stages (to lift water from greater depths). For example, the cast iron Flint & Walling CPJ15 Deluxe Deep Well Jet[3] pumps depths up to 150' and costs $675-$745. Within this general price range there are also convertible jet pumps that can be used in either shallow or deep wells. For example, the cast iron Dayton 1D875 3/4HP Convertible Jet Pump[4] costs $375.
  • Submersible residential well pumps typically cost $200-$1,200 or more, depending on size (usually 3"-6" in diameter and 2'-4' long), capacity (gallons per minute), motor (3/4HP-5HP) and materials (cast iron, stainless steel). For example, the stainless steel 1/2HP Dayton 1LZR4 Deep Well Submersible Pump[5] pumps 10GPM and costs $475, while the stainless steel 1HPl Goulds 25GS Submersible Water System Pump[6] delivers 25GPM and costs $740-$1,000.
  • In addition to labor, the installation of a water pump may require additional piping or other plumbing, and possibly repairs to the water system if replacing an old pump. Installation can add $250-$2,500 or more to the total, depending on what's included. The Wisconsin Department of Natural Resources[7] estimates the total cost of replacing the typical domestic submersible pump at $600-$1,200, not including cleanup or repair of the well and/or plumbing system.
Related articles: Well Drilling, Water Testing and Treatment

What should be included:
  • Well pumps raise water from a well and, typically, deliver it to a storage tank where it is held under pressure until needed. Most well pumps are not designed to run continuously, and don't start pumping water each time a faucet is turned on or a toilet is flushed. Instead, the pump delivers water to the storage tank until the tank's pressure hits a preset level, usually 40 to 60 psi (pounds per square inch). The pump then switches off until the pressure in the tank drops a specific amount, which prompts the pump to re-fill the tank. Popular Mechanics explains how well pumps work[8] .
  • Installing or replacing a well pump can be a do-it-yourself project with basic plumbing and electrical skills, but depending on the depth of the well it may require strength and assistants to pull the existing flexible pipe out of the well. A well pump professional typically uses a pump puller machine or a derrick truck to remove the old well piping. A well pump installer provides an installation video[9] for a replacement 3/4 HP submersible pump, while a well owner demonstrates a shallow jet pump[10] used for landscape irrigation.
  • The water system should be disinfected and re-tested after any work is done. Most well pump installers include this in their installation fees.
Shopping for a well pump:
  • Well pumps are typically available from most home improvement and hardware stores like Home Depot[11] ; online retailers like Amazon[12] ; plumbing supply centers; and well drilling companies.
  • The size and type of well pump needed depends on the depth of the well, the elevation, local conditions and the total amount of household water usage. The right size well pump should have the capacity to meet the normal peak household demand, rather than just average use. The Water Systems Council provides guidelines for sizing and selecting a water pump[13] .
Post Tweet  Comments (21) &nbsp
CostHelper News


7 Lesser-Known Discounts for the 50+ Crowd
As they age, members of the Baby Boomer generation don't like to admit that they're senior citizens, but they love getting discounts. It's kind of a quandary, because some of the best deals available are reduced prices for older folks. || Posted October 21 2013


10 Most Popular Cosmetic Procedures Before the Holidays
With reunions and other get-togethers scheduled during the holiday season, most people want to look their best at this time of year. For some, that means filling in those wrinkles with a bit of botox, or having a nip and tuck down here and there. || Posted November 23 2013

‣ All CostHelper Blog Posts


What People Are Paying - Recent Comments
Pull and replace 3/4 HP submersible
Amount: $1,275.00
Posted by: Jason Anthony in South Kingstown, RI. Posted: February 28th, 2018 02:02PM
400’ deep
Was this post helpful to you?   yes     no Report prohibited or spam
Pulled 3hp pump
Amount: $1,100.00
Posted by: Dave A. in SAINT CHARLES, IL. Posted: April 21st, 2017 05:04AM
Type of Pump: 3hp submersible Installation Required: Yes
Pump pulled broken shaft - waiting for estimate about replacement. $1100 seems high for just pulling. I fear the estimate will be high. The pump was set at 590 ft. Using old wire and pipe, what should this cost? Illinois western suburbs of Chicago
Was this post helpful to you?   yes     no Report prohibited or spam
New Well Pump
Amount: $1,553.00
Posted by: dactulwench1 in Texarkana, TX. Posted: January 23rd, 2017 10:01AM
Type of Pump: Jet to Submersible Installation Required: Yes
Our above ground pump was already dated and exposure to our acidic water made the matter even worse, to the point where the pipes rusted and water was leaking everywhere in the well house. Was told by the contractor that they no longer install above ground pumps, so they are replacing with submersible pump. Also, asked for quote for a water neutralizer to address the acidity problem, and was quoted for an additional $1400.
Was this post helpful to you?   yes     no Report prohibited or spam
REPLCED DUG WELL WITH DRILLED WELL AT RESIDENCE
Amount: $6,100.00
Posted by: JR MARTIN in HUDSON, NH. Posted: January 7th, 2017 12:01PM
Type of Pump: FRANKLIN 1 and1/2 hp Installation Required: 1 day's labor
ATFER SPENDING $6600 for drilling 420 ft., we were
shocked at installation charge, Huge markup by installer
on all parts. 2 gal tank requires almost constant pumping.
Can't wait to see our next electric bill.
Was this post helpful to you?   yes     no Report prohibited or spam
Well pump cost
Amount: $3,800.00
Posted by: Ugh. in Chapel Hill, NC. Posted: January 1st, 2017 07:01PM
Well pump, pressure tank, 400 feet of wire/pipe
Was this post helpful to you?   yes     no Report prohibited or spam
Pull and replace submersible pump 520 ft
Amount: $1,950.00
Posted by: Pam Berthelette in Storrs Mansfield, CT. Posted: October 22nd, 2016 10:10AM
Type of Pump: Franklin 1 hp 5gpm 3200 submersible Installation Required: Pump set at 500'
3 men 2 trucks 3 hours work,
Was this post helpful to you?   yes     no Report prohibited or spam
Well pump replaced
Amount: $1,395.00
Posted by: Tpk in Plant city, FL. Posted: October 20th, 2016 01:10PM
Type of Pump: Pearl 4pwp25g 10c163p Installation Required: Yes
Used a truck with boom to pull out old pump and replace with new.
Was this post helpful to you?   yes     no Report prohibited or spam
New install on new duplex well pump
Amount: $1,035.00
Posted by: Andrew Kerk in Wasilla, AK. Posted: June 25th, 2016 04:06PM
Type of Pump: 1/2 hp franklin Installation Required: Controller box, wire etc
E and D water wells installed me new 1/2 hp pump in 60'deep well. Took them 45 minutes to do the job
Price is fair , did not test the pump yet, no perm power installed yet
Was this post helpful to you?   yes     no Report prohibited or spam
Well pump and pipe replacement
Amount: $2,400.00
Posted by: Jose Morales in Brookfield, CT. Posted: May 25th, 2016 09:05AM
Type of Pump: Submersible 1/2 hp grundfos Installation Required: Yes
My well casing cover was rusted on pretty good. The installer had to cut through it with a sawzall. The pump had gone bad due to a crack in one of the elbows at the well seal (probably what caused all the rust) and there was apparently a hole in the pipe about sixty feet down. We also topped off our pool a week before (opened it for the season) and had a big BBQ that weekend. The check valves may have been bad which probably allowed water back down and kept the pump running more than necessary, eventually burning it out.The pipe was schedule 40 pvc (6 lengths of 20' pipe). We have a high water table. I'd figure the well is not much deeper than 120' and the static level is between 20'-30' (water was flowing out the casing before the new pump was all the way down). The installer replaced old 1/3 hp goulds pump with a 1/2 hp grundfos. He replaced the pipe with sch 80 or 120 pvc pipe and couplings. Wire to pump, seal and fittings at seal were replaced. Final cost was just under $2400.
Was this post helpful to you?   yes     no Report prohibited or spam
Replaced galvanized well pipe and pump
Amount: $2,200.00
Posted by: Steward in EUREKA, MT. Posted: April 28th, 2016 09:04AM
Type of Pump: 1/2 HP Franklin pump Installation Required: yes
Old pump was running constantly. Tested pressure tank and pump both seem to be okay. Believe
24 year old galvanized well pipe was leaking. Replaced old pump and pipes. Labor and technician cost $460. Material cost $1740.
Was this post helpful to you?   yes     no Report prohibited or spam
Install well pump
Amount: $2,700.00
Posted by: St.Martin in Edgewood, NM. Posted: January 21st, 2016 07:01AM
Type of Pump: Grundfo Installation Required: deep well
I had several local well company,s not return calls. Old pump was very loud, water would come out, about 20 gallons, and then no water for three too four minutes and reapeat to trickle. Contacted a local plumber, who troubleshot the the well pump, they said the pump had very low amps, and wanted to pull the well pump (200 feet). They pulled the old pump (13 years old), and advised me to replace the pump. 3/4 Grundfo pump installed, they used same wire which was in good shape replaced adapters on old plastic pipe, new control box. Owner and one worker, two work trucks,one with a wench lift. About 6 hours of labor. I thought it was a little pricey, but they did answer the phone and showed up and the work got done, and were very professional. Plumber advised if I had any problems with the new pump to call him and he would return to fix the problem. They worked in one feet of snow melting to mud. Pricey but it was well worth it.
Was this post helpful to you?   yes     no Report prohibited or spam
4" sub pump 1.5hp 27 gal/miin
Amount: $1,500.00
Posted by: The broke people in Sycamore, SC. Posted: September 24th, 2015 07:09AM
Type of Pump: Flint & Walling Installation Required: yes
Had to replace our motor and pump...pulled up 70 feet of line, new couplings, new connections wiring harness, took an hour and a half - two men, three hours of labor
total cost $1500 the pump is overkill could have use half of this power...educate before emergency and we could have saved $800
Was this post helpful to you?   yes     no Report prohibited or spam
Replaced submersible pump
Amount: $1,193.00
Posted by: Victor G in Onaway, MI. Posted: June 23rd, 2015 01:06PM
Type of Pump: 4'" .5HP Red Jacket Enduro Installation Required: yes
The home inspection report recommended that a well pro check our well before we bought closed on home. So once I realized nearly 30 days after moving in that he pump was constantly running and my tank pressure was 25 lbs I finally called the company who dug the well. The owner and his nephew, with his son, showed up. Turbo-charged crew. What a great team.142 feet deep.
Was this post helpful to you?   yes     no Report prohibited or spam
Replacing Well Pump
Amount: $2,681.00
Posted by: bigfish in Middletown, VA. Posted: June 21st, 2015 03:06AM
Type of Pump: Myers 1 HP 12 gpm Installation Required: Yes
255 ft well. 3rd Pump in 27 years. $525 in labor, Straight forward job, pulling up old pump, putting new one on, replace the wiring, installed new pressure tank and switch. I've used the same installer for 27 years. Price of pump was the only thing I questioned. He is giving me the cost of $1388 and I see the same pump online for around $400. If I'm looking at the same material a 3x markup is excessive. But he is a very responsive efficient person, so I just go with it.
Was this post helpful to you?   yes     no Report prohibited or spam
well repair on a 200 ft repair
Amount: $3,791.00
Posted by: sam flyn in Arlington, WA. Posted: February 3rd, 2015 11:02AM
Type of Pump: 1hp stainless-steel F&W Installation Required: DEEP WELL
i got all new materials at todays prices...this price is what you should exspect if its done rite. some of the low prices you read about dont tell the whole story...you get what you pay for.
Was this post helpful to you?   yes     no Report prohibited or spam
Well Pump installation
Amount: $2,280.00
Posted by: ArtC in Sherman, CT. Posted: December 13th, 2014 03:12PM
Type of Pump: jet pump Installation Required: yes
30 degree day.... 2 installers. Did a great job. Put in a 10 gal. 1/2 hp 3 wire Berkley pump, 1/2 hp control box, 6X1 well seal and some other stuff I can't make out on the receipt. Our well is 265 ft. deep. I feel it was very fair price for the work and technical expertise required.
Was this post helpful to you?   yes     no Report prohibited or spam
repair submercible well pump
Amount: $2,000.00
Posted by: sanmikie in clovis, NM. Posted: November 20th, 2014 01:11PM
Type of Pump: submercible Installation Required: 350 ft
I had my pump pulled up they had trouble pulling the pipe because of misalignment from previous work,the stop valves were bad an seals replaced but pump tested good,took 4 days because they had to take top and cement out to pull pipe.
Was this post helpful to you?   yes     no Report prohibited or spam
Installing a deep well 200-220 ft deep
Amount: $4,250.00
Posted by: Gorio in Graniteville, SC. Posted: November 12th, 2014 03:11AM
Type of Pump: Stainless submergible Installation Required: Yes
I've not installed the well yet but I've received quotes ranging from $4,000-$5,400.00. All are local well drillers and quoted similar installation services. In addtion to the above charges I'll need to hire an electrician to powere the pump and a plumber to hook up the well to my sprinkler irrigation system.
Was this post helpful to you?   yes     no Report prohibited or spam
Recently Replaced Pump and motor
Amount: $2,000.00
Posted by: a user in Lincolnton, NC. Posted: May 27th, 2013 07:05AM
Type of Pump: Grundfos Installation Required: Yes
Replaced over Memorial Day Weekend. Well is 700 feet deep with the pump set at 650 feet deep. Replace the old pump with a new Grundfos motor 1 1/2HP and a Goulds pump end model 7G515. Parts and material total was $2000.00. The gentlemen that did the work were very professional and timely.
Was this post helpful to you?   yes     no Report prohibited or spam
DVA well pump on electric panel
Amount: $0.00
Posted by: Blanche in Sequim, WA. Posted: February 29th, 2012 12:02AM
Type of Pump: do not know Installation Required: do not know
I have been in a rental for two years now and was not aware that my water is supplied by both city utility company and an electric well pump. There is a circuit on my electric panel box labeled "DVA Well" and the circuit was flipped in the 'on' position. Last month the adult son of our neighbor walked over on a Sunday morning because his dad wanted us to know that our electric well pump had been on for quite some time and were we aware of it. We were not; since all circuits were turned to 'on' position for at least a year does that mean we have had continuous well water pumping via the electrical panel? Who is responsible for the exorbitant water and electricity costs for the past year; tenant with no knowledge of such device or the owner?
Was this post helpful to you?   yes     no Report prohibited or spam
need new well pump
Amount: $8,000.00
Posted by: rich vang in fresno, CA. Posted: February 18th, 2012 04:02PM
Type of Pump: farmer for 4 acres Installation Required: yes at the farm
i need to put a new well pump to my farm i want to know how much is it.
Was this post helpful to you?   yes     no Report prohibited or spam


 

Comment On Your Experience With a Well Pump
 
Subject:  *
Amount Spent:  *
Type of Pump:  Installation Required: 
Comments: 
Purchased:  Year: 
City:  * State:  *
 
Information about you:
Email:  * Email addresses are not displayed.
Name:  This is the name we'll display with your post.
me on this computer
*=required field.
 



External Resources:
  1.  www.grainger.com/Grainger/shallow-well-jet-pumps/well/pumps/ecatalog/N-awg
  2.  www.grainger.com/Grainger/DAYTON-Shallow-Well-Pump-1D872?Pid=search
  3.  www.flintandwalling.com/ProductBenefit.aspx?ProductID=272
  4.  www.grainger.com/Grainger/convertible-well-jet-pumps/well/pumps/ecatalog/N-awc
  5.  www.grainger.com/Grainger/DAYTON-Pump-1LZR4?Pid=search
  6.  unitedstates.xylemappliedwater.com/brands/goulds-water-technology/
  7.  dnr.wi.gov/newurl.html
  8.  www.popularmechanics.com/home/improvement/electrical-plumbing/1275136
  9.  www.youtube.com/watch?v=XUEjpRhcTvk
  10.  www.youtube.com/watch?v=XwYOUu1V8WM
  11.  www.homedepot.com/webapp/wcs/stores/servlet/Search?keyword=well+pumps&langId=-1&st...
  12.  www.homedepot.com/webapp/wcs/stores/servlet/Search?keyword=well+pumps&langId=-1&st...
  13.  www.watersystemscouncil.org/VAiWebDocs/WSCDocs/2567958WSC_INST_20.pdf
More Home and Garden Topics
Check Out All Costs for Home and Garden How Much Does Pressure Washing Cost? How Much Does a Central Air Conditioner Cost? How Much Does a Deck Cost?

Search Thousands of Topics on CostHelper.com

 
Today's Featured Cost Articles

About CostHelper
CostHelper is based in Silicon Valley and provides consumers with unbiased price information about thousands of goods and services. Our writers are experienced journalists who adhere to our strict editorial ethics policy.

CostHelper Community
Hand X-ray for Bone Age
Paid: 244.47
This was a single x-ray of the hand. The listed price is after the insurance discount (deductible not met yet). They billed my insurance $436 for this ONE x-ray... [more]
-Christy Y.
Bone X-Ray Cost
propane 250 gallon tank
Paid: 541.51
$2... [more]
-lori stone
Propane Tank Cost
Boundary Line survey of 1/2 acre lot
Paid: 975.00
Surveyor I hired researched deeds and maps at courthouse, set pins around my property and explained results to me... [more]
-Charlie Cranch
Property Survey Cost
What a way to appreciate your semi drivers
Paid: 925.00
Tried parking across the street at Walmart, no spaces available. Needed to stop and eat food for DOT regulated break. Left truck for 23 minutes, came back to 2 boots and a $925 fine to get them removed... [more]
-Ayub
Removing a Car Boot Cost
$58K for 5 hours
Paid: 58000.00
Just got my bill for lapiplasty bunion correction and removal of older hardware for bunion correction that failed to keep the correction. Over $58000. About $20000 of that was the hardware apparently... [more]
-Liz Sugar
Bunion Treatment Cost
Parked near a fire hydrant
Paid: 167.00
I parked near a fire hydrant in the state Hawaii. Since I’m European and we don’t have these in my home country I had no idea this isn’t allowed. There was no mark on the sideway to say you couldn’t park there... [more]
-AnneLaure
Recovering a Towed Vehicle Cost