• Applications include laundry tray pump, wet bar sink, lavatory, air conditioning condensate and dehumidifier water removal. Can also be used in conjunction with dishwashers and garbage disposal.
• NEW Preassembled Model 105 Available. (105-0017)
• 132 comes preassembled
• No inlet filters or screens to clean
• Optional top or side inlet
• Can be installed with internal trap
• Automatic pumps with tank cord seals
• All hardware for easy assembly
• Polypropylene basin and lid
• Internal discharge pipe to lid (trap supplied by others)
• Check valve (30-0181, not included with model 104)
• Contact factory for additional inlet option or high head applications
• Easy installation, no need to dig a sump

Pump features

Models 53®, 55, 57, 59, 63, 98

• Passes laundry lint
• Automatic, float-operated mechanical switch
• 9' (3 m), UL listed, 3-wire cord and plug (15' [5 m] cord standard on model 98)
• Stainless steel screws, guard, handle and switch arm
• Passes 1/2” (12.7 mm) spherical solids
• 1-1/2” NPT discharge
• 1550 RPM on 50 series
• 1725 RPM on model 98
• Non-clogging vortex impeller
• Glass-filled, polypropylene base with built-in strainer
• Model 59 - all bronze construction
• Models 57 and 98 - all cast iron construction
• Temperature rated 130 °F (55 °C)
• UL and cCSAus listed pump
• 1 year limited warranty on Models 55 and 59
• 3 year limited warranty on Models 53, 57, and 98
• 5 year limited warranty on Model 63

Model 72

• Passes laundry lint
• 9' (3 m), UL-listed, 3-wire cord and plug
• Stainless steel screws, switch arm and lower motor housing
• Oil-free
• Passes 3/8” (9.5 mm) spherical solids
• 1-1/2” NPT discharge
• 3400 RPM
• Non-clogging vortex impeller
• Temperature rated 110 °F (43 °C)
• cCSAus listed pump
• 1 year limited warranty on Model 72

Basin

• Polypropylene construction
• Corrosion-resistant
• High capacity
• Gasket-sealed polypropylene lid
• 2” NPT vent
• 1-1/2” NPT discharge
• 1-1/2” compression slip fit for top and side intake. Note: 132 comes preassembled, for side inlet only
• Threaded connections for easy installation
• May be installed with internal trap for space savings
• Gas-tight cover
• Temperature rated 130 °F (55 °C)
• Fits under most sinks
• Basin passes 10’ (3 m) stack test – Models 104 and 132 will not pass 10’ (3 m) stack test

Check valve (excluding model 104) (30-0181)

• “Full Flow” design
• 1-1/2” or 1-1/4" slip x slip union
• PVC construction
• For additional specifications, see FM0217.

Notes

Product may not be exactly as pictured.

For additional inlet option or high head applications, consult factory.

Reserve Powered Design.

For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.