Tobee® TH10x8 Gypsum Slurry Pump is the heavy duty pump for handling corrosive and abrasive slurries. It is mainly used for transporting Solid-liquids mixture with solid suspending (like gypsum, lime, limestone, ore, sand, gravel, ash etc.) or strongly abrasive and corrosive slurriesw with high concentration slurry. The 10x8 Gypsum slurry pump are used perfect impeller structure ensure satisfactory performance with long life and needs minimum maintenance requirements.
Design Features:
• The Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and lowest maintenance
• The Large, open internal passages designed to reduce internal velocities, maximize wear life and lowest maintenance
• Heavy duty construction with through-bolt design provides ease of maintenance and Min downtime
• The Replaceable and Interchangeable Wet End Parts are lower the stocking cost, easy to repair and Min downtime
• The Ductile iron fully lined casing provides durability,strength, safety, and long service life recommended while the Grey iron liner is the economic solution could satisfied the most customers required especially when you dont need the pumps work at 24x7
• Minimal shaft/impeller overhang reduces shaft deflection and increases packing life and the mean time between failures
• Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life, which is another way to increase the mean time between failures
• Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime
• Lower NPSH requirements results in enhanced hydraulic performance and extended the wear life
• The metal or rubber parts are available for different work conditions Max the wear life and lowest the maintenance cost
Tobee® TH10x8 Gypsum Slurry Pump Performance Parameters:
| Model |
Max.Power (kw) |
Materials | Clear water performance |
Impeller Vane No. |
|||||
| Liner | Impeller |
Capacity Q (m3/h) |
Head H (m) |
Speed n (rpm) |
Eff. η (%) |
NPSH (m) |
|||
| TH10x8ST | 560 | M | M | 612~1368 | 11~61 | 400~850 | 71 | 4~10 | 5 |
| RU | RU | 540~1188 | 12~50 | 400~750 | 75 | 4~12 | |||
| TM10x8E | 120 | M | M | 666~1440 | 14~60 | 600~1100 | 73 | 4~10 | 5 |
| RU | RU | 540~1188 | 10~42 | 500~900 | 79 | 5~9 | 5 | ||
Tobee® TH10x8 Gypsum Slurry Pump Structural Drawing:
Tobee® TH10x8 Gypsum Slurry Pump Materials of Construction:
|
ITEM |
LINERS | IMPELLERS | CASING | BASE | EXPELLER | EXPELLER RING | SHAFT SLEEVE | SEALS |
| Standard | Chrome Alloy Natural Rubber |
Chrome Alloy Natural Rubber |
SG Iron | SG Iron | Chrome Alloy or SG Iron |
Chrome Alloy or SG Iron |
SG Iron | Rubber and Nitrile |
| Options | Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Viton Nitrile EPDM Hypalon |
Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Nitrile Hypalon |
SG Iron Various grades |
MS Fabricated Cast Iron |
NI Resist Ferralium Hastelloy C Polyurethane 316 SS W151 |
NI Resist Ferralium Hastelloy C 316 SS Rubber W151 Polyurethane Neoprene Butyl Nitrile |
EN56C Ferralium Hastelloy C Titanium 316 SS 304 SS |
Ceramic Stellite Chrome Oxide Nordel Neoprene Viton |
Tobee® TH10x8 Gypsum Slurry Pump Drive Module Design:
|
|
|
Tobee® TH10x8 Gypsum Slurry Pump Matched Frame:
| Frame type | A | B | C | D | E | R | F | G | ST | TU |
| Max.Power (kw) | 7.5 | 15 | 30 | 60 | 120 | 300 | 260 | 600 | 560 | 1200 |
| Frame Weight (kg) | 17 | 24 | 45 | 77.5 | 154 | 228 | 555 | 1006 | 546 | 1156 |
| Amount of Shaft Sealing Water (l/s) | 0.15 | 0.25 | 0.35 | 0.55 | 0.70 | 0.70 | 0.70 | 1.20 | 1.20 | 1.60 |
Tobee® TH10x8 Gypsum Slurry Pump On-site Applications:
| • Mining | • Gypsum | • Limestone | • Mineral processing |
| • FGD | • Chemical slurries | • Tailings | • Lime slurries |
| • Ash handing | • Cyclone feeds | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • Construction |
| • Alumina Industry | • Power Plant | • Potash Fertilizer Plant | • Other industries |
Tobee® TH10x8 Gypsum Slurry Pump Dimensional Drawing:
* Tobee® is a registered trademark and does not represent or is not in any way affiliated with Warman®
of Weir Minerals Group. All names,numbers, symbols and descriptions are
used for reference purpose only and do not imply that any pumps or
parts listed is the product of Warman Pumps.
* Tobee® TH10x8 slurry pumps and slurry pump parts are only interchangeable with Warman® 10/8 AH slurry pumps and warman pump parts.
* This document is the property of Tobee® Pump and can be neither reproduced nor disclosed to a third party without a written authorization.